New 150W/60V/30A DC Electronic Load in a low-cost, compact package

FOR IMMEDIATE RELEASE

YORBA LINDA, CA December, 2008

B&K Precision Corporation announces the immediate availability of the model 8540 DC Electronic Load. Priced at $499, the compact instrument measures only 3.5” x 6.9” x 11.10” and is at home on both the bench and the production floor. The Model 8540 can reliably test a 5 volt power supply to 30 amps and do it continuously.  The unit can operate in CC, CV, or CR mode while voltage/current or resistance/power values are measured and displayed in real time, making it well suited to test a variety of DC power sources.

The 8540's performance is comparable to most basic bench DC electronic loads, yet it does the job at half the price and takes up half the space on your bench.

Outstanding features of the model 8540 DC Electronic Load include:
● Operates between 0 to 60 V, 1 mA to 30 A (150 W max)
● Constant current (CC), resistance (CR), and voltage (CV) operation
● Easy to operate
● Bright, easy to read display
● Very compact and light weight (6lbs.)
● Two current ranges: 3 A (1 mA resolution) and 30 A (10 mA resolution)
● Built-in high resolution (0.1 mA/1 mV) voltage and current measurement
● Over-Current and Over-Voltage Protection
● Short mode to simulate shorts
● Saves up to 400 instrument settings.

Available for immediate delivery, the model 8540 DC Electronic Load is priced at a low $499.00 and comes with a power cord, user manual and one-year warranty.
For the name and location of an authorized distributor near you, contact B&K Precision Corporation, 22820 Savi Ranch Parkway, Yorba Linda, California, 92887, Tel: (714) 921-9095, Fax: (714) 921-6422 or visit our web site at www.bkprecision.com.

For additional information, contact Jorg Hesser at (714) 921-9095, e-mail: jhesser@bkprecision.com or Matthew Stein at (951) 850-1521, e-mail: mstein812@verizon.net  (Agency Contact).

Attn. Editor: To obtain a high resolution image of this product, please go to http://www.bkprecision.com/support/downloads/hires/  The photos are easy to download, just point at the desired image and right click to save to your hard drive or other specified location.

60 MHz and 100 MHz Dual Channel Digital Oscilloscopes Offer Unmatched Performance and Value

FOR IMMEDIATE RELEASE

60 MHz and 100 MHz Dual Channel Digital Oscilloscopes Offer Unmatched Performance and Value

B&K Precision Corporation continues to grow its line of affordable dual channel Digital Storage Oscilloscopes (DSO) with the introduction of two new models: the 2540 (60 MHz) and 2542 (100 MHz). These are versatile and compact oscilloscopes delivering an unmatched combination of features, performance and value. Auto measurement functions and analog-style knobs make these oscilloscopes easy to use. Advanced triggering, digital filtering, waveform recorder, delayed sweep/zoom, mask testing, automatic measurements, and FFT functions provide the user with many options for troubleshooting and debugging.

The oscilloscopes come with PC software to easily capture, save, and analyze waveforms and measurement results and to remotely control the instruments via a virtual panel. At $940 for model 2540 and $1,155 for model 2542, these models are among the most aggressively-priced oscilloscopes on the market today. Both models are ideal oscilloscopes for use in education, design, training, field service, maintenance, manufacturing and quality control.

The many outstanding features of the 2540 and 2542 include:

• Up to 100 MHz bandwidth, 1 GSa/s sample rate
• 4000 point record length for each channel
• One touch automatic setup for ease of use (Auto button)
• Large Color LCD display
• USB front panel host port for USB flash drives standard
• Advanced features include digital filter with adjustable limits, mask testing, and waveform recorder/replay mode
• Cursors with readouts
• 24 automatic measurements
• FFT standard plus 3 additional math functions
• Extensive triggering capabilities including pulse width and line-selectable video trigger
• Multiple language interface
• PC software which lets you remotely control the oscilloscope via the USB interface and capture, save and analyze waveform data

Measuring a compact 12.2” wide by 10.6” deep by 5.8” high and weighing 8 lbs, both the Model 2540 60 MHz Digital Storage Oscilloscope and Model 2542 100 MHz Digital Storage Oscilloscope come complete with operating manual, two 150 MHz 10:1 passive probes, power cord, USB interface cable, and Comsoft software installation disk. They are priced at $940 and $1,155 respectively, quantity one, and are available for immediate delivery.

For the name and location of an authorized distributor near you, contact B&K Precision Corporation, 22820 Savi Ranch Parkway, Yorba Linda, California, 92887, Tel: (714) 921-9095, Fax: (714) 921-6422 or visit our Web site at www.bkprecision.com.

For additional information, contact Jorg Hesser at (714) 921-9095, e-mail: jhesser@bkprecision.com or Matthew Stein at (951) 850-1521, e-mail: mstein812@verizon.net  (Agency Contact).

Attn. Editor: To obtain a high resolution image of this product, please go to http://www.bkprecision.com/support/downloads/hires/.  The photos are easy to download, just point at the desired image and right click to save to your hard drive or other specified location.

B&K Precision Corp. Acquires Majority Ownership of Global Specialties

FOR IMMEDIATE RELEASE

B&K Precision Corp. Acquires Majority Ownership of Global Specialties

Yorba Linda, California - September 26, 2008 - B&K Precision Corporation has acquired a majority ownership of Global Specialties LLC, according to Victor Tolan, President of B&K Precision.  Mr. Tolan states that, “as a subsidiary of B&K Precision, Global Specialties will utilize B&K’s vast resources to invest in inventory, new products and marketing and to increase Global’s presence in foreign markets.”

Global Specialties has retained Eric Blauvelt as its President, and Frank Menichello as its National Sales Manager.  All products will be shipped from B&K’s facility in California, while marketing, sales and product development activities will be handled by Global’s main office in Connecticut.

B&K Precision of Yorba Linda, CA, is a multi-national company founded in 1951, and is a leading supplier of high quality, cost effective electronic test and measurement instruments. Global Specialties of Wallingford, CT, is a market leader in high-performance electronic prototyping and design products, founded in 1973. Global’s Proto-Board® branded prototyping boards and design trainers are the benchmark for reliability, durability and long-life in the education and R&D markets.

Contact:
Victor Tolan, President
B&K Precision Corporation
714-921-9095
www.bkprecision.com

Eric Blauvelt, President
Global Specialties LLC
203-265-9700
www.globalspecialties.com

Three New Auto Ranging DMMs Offer Exceptional Price, Accuracy, and Functionality

YORBA LINDA, CA. . . . SEPTEMBER, 2008

Three New Auto Ranging DMMs Offer Exceptional Price, Accuracy, and Functionality

B&K Precision Corporation announces the addition of three new auto ranging DMMs, the Model 2705B, Model 2708B, and the Model 2709B, to its growing line of test and measurement instruments. Two of the full-featured hand-held, battery powered DMMs (Models 2708B and 2709B) offer True RMS measurements. All three feature large easy-to-read LCD displays and single-handed operation. Priced as low as $65 (Model 2705B), these excellent meters offer flexibility, accuracy and speed and are a must for every tool kit.

Value-packed features common to all three new DMMs include the following:

• DC voltage to 1000 V
• AC/DC current to 10 A
• Diode test
• Magnetic hanging strap
• AC voltage to750 V
• Continuity test
• Single-handed operation
• Drop-resistant case
• One year warranty

The Model 2705B Auto Ranging DMM is a full-featured auto ranging DMM that combines performance, value and functionality. The 3400 count LCD can display resistance values up to 40 Mohm. The user can select between Auto and Manual Ranging. The ergonomic design allows both left and right handed users to rotate the knob while holding the meter in one hand. While one hand keeps the probe on the circuit, the other hand changes the meter’s function. This speeds up troubleshooting. With the auto-power-off feature, there is no need to worry about accidental battery consumption. Value-priced at only $65.00, the following features make this instrument a “must” for every tool kit:

• Auto/manual ranging
• Auto power off
• Measures up to 10 A (AC and DC)
• Resistance to 40 Mohm 

The Model 2708B is a full-featured auto ranging, True RMS DMM that combines performance, value and functionality. The 3400 count LCD has a 34 segment bar graph that simulates analog responsiveness by updating at a rate of 12 times per second. The Model 2708B can measure resistance values up to 34 Mohm. The user can select between Auto and Manual Ranging. The ergonomic design allows both left and right handed users to rotate the knob while holding the meter in one hand. While one hand keeps the probe on the circuit, the other hand changes the meter’s function. This speeds up troubleshooting. The auto-power-off feature eliminates the need to worry about accidental battery consumption. Value-priced at only $95.00, the following features make this instrument a “must” for every tool kit:

• True RMS
• Resistance to 34 Mohm
• One handed operation
• Auto/manual ranging

The Model 2709B is a full-featured auto ranging, True RMS DMM that combines performance, value and functionality. The 6600 count LCD has a green back light that allows the meter to be used in dimly lit environments. The Model 2709B can measure resistance values up to 66 Mohm and capacitance to 66 uF. The user can select between Auto and Manual Ranging. The ergonomic design allows both left and right handed users to rotate the knob while holding the meter in one hand. While one hand keeps the probe on the circuit, the other hand changes the meter’s function. This speeds up troubleshooting. The auto-power-off feature eliminates the need to worry about accidental battery consumption. Value-priced at only $99.00, the following features make this instrument a “must” for every tool kit:

• True RMS
• Resistance to 66 Mohm
• Capacitance to 66 uF
• Frequency counter to 66 MHz
• Large easy-to-read LCD with back light
• Single-handed operation
• Auto/manual ranging

Compact (165mmH x 75mmW x 42.5mmD), and light weight (10.3oz),
all three units are available for immediate delivery. Priced at $65 for the Model 2705B, $95.00 for the Model 2708B, and $99.00 for the Model 2709B, these meters come complete with 9 V battery, one set of test leads, one spare fuse, instruction manual, and B+K Precision’s one year warranty. A complete line of optional accessories is also available.

For the name and location of an authorized distributor near you, contact B&K Precision Corporation, 22820 Savi Ranch Parkway, Yorba Linda, California, 92887, Tel: (714) 921-9095, Fax: (714) 921-6422 or visit our Web site at www.bkprecision.com

For additional information, contact Greg Von Rehder at (714) 921-9095, e-mail: gregv@bkprecision.com or Matthew Stein at (9512) 850-1521,
e-mail: mstein812@verizon.net (Agency Contact).

Economical, Compact Switching DC Power Supply with USB Charging Port Provides 1–36 V, 0-3 A Output

Economical, Compact Switching DC Power Supply with USB Charging Port Provides 1–36 V, 0-3 A Output

B+K Precision Corporation’s model 1550  Switching DC Power Supply is a compact 108 Watt DC power supply delivering 1-36 V and 0-3 A to its main isolated output. Operating as a constant voltage source or as a constant current source, automatic crossover to either mode of operation occurs when the load condition changes. The unique front panel mounted USB 1.1 charging port permits the user to conveniently charge a cell phone or MP3 player.

Priced at a low $139.00 and measuring a compact 2.8” (w) x 6.0” (H) x 9.8” (D),  the  1550’s clean power and quiet operation makes it an ideal power supply for use in offices, laboratories, work shops, and schools where bench space is limited.

Features include:

• USB charging port on front panel*
• Rear panel security loop
• Compact design
• Output ON/OFF control
• Large, bright, easy-to-read display
• Constant voltage and constant current operation
• Over-voltage protection
• Over-temperature protection

* USB 1.1 charging port will not charge products compliant with USB 2.0 only

The model 1550 Switching DC Power Supply with USB charger port is a micro-controller-based DC power supply with USB charger output, constant current operation, over-voltage protection, floating (isolated-from-ground) output terminals, and an output on/off push button. By using the digital plus/minus (+/-) key control on the front panel, the user can easily set the output voltage and current. 

The USB output is rated at 5 VDC and 0.4 A in accordance with the USB 1.1 standard. The user can power up or charge portables such as iPods, MP3 players, or cell phones, rather than having to charge the device by connecting it to a computer’s USB port.

The power supply is designed to operate as a constant voltage source as long as othe load current is less than the preset current-limiting value. When the load current is equal to or greater than the preset current-limiting value, the power supply will automatically cross over to the constant current mode and the voltage will drop. When the current drops below the preset current-limiting value, the supply returns to constant voltage mode.

Priced at $139.00, the model 1550 is available for immediate delivery and comes complete with line cord, user manual, and B+K Precision’s one year warranty.

For the name and location of an authorized distributor near you, contact B&K Precision Corporation, 22820 Savi Ranch Parkway, Yorba Linda, California, 92887, Tel: (714) 921-9095, Fax: (714) 921-6422 or visit our Web site at www.bkprecision.com.

For additional information contact Greg Von Rehder at (714) 921-9095, ext. 230, e-mail: gregv@bkprecision.com or Matthew Stein, (951) 850-1521, e-mail: mstein812@verizon.net (Agency contact).

Dual Channel 40 MHz Digital Storage Oscilloscope With Color Display

Dual Channel 40 MHz Digital Storage Oscilloscope With Color Display

B&K Precision Corporation’s new Model 2532 Dual Channel Digital Storage Oscilloscope (DSO) delivers an unmatched combination of performance and value. This versatile bench top unit is a versatile 40 MHz digital oscilloscope with analog-style knobs and controls.  The AUTO button makes this oscilloscope easy to use. Advanced triggering, automatic measurements, and FFT functions provide the user with many tools to debug circuits.

The Model 2532 comes with PC software that can be used to easily capture, save, and analyze waveforms and measurement results. The low price of $699.00 makes it one of the most aggressively-priced scopes on the market today.  It is the ideal oscilloscope for use in education, training, maintenance, manufacturing and quality control.

The Model 2532’s outstanding features include:

• 40 MHz bandwidth, 500 MSa/s sample rate
• Color LCD display
• 4000 point record length for each channel
• One touch automatic setup for ease of use (AUTO button)
• USB device port on back of instrument
• Time and amplitude cursors with readouts
• Eleven automatic measurements
• FFT standard plus four additional math functions
• Extensive triggering capabilities including pulse width and line-selectable video trigger
• Multiple language interface
• Capture, save and analyze waveform data with the included PC software
• Built-in security loop cable channel to secure the scope to its location

Measuring 11.4” wide by 11.8” deep by 5.9” high, the Model 2532 40 MHz Digital Storage Oscilloscope weighs 10 pounds and comes complete with operating manual, 10:1 probe Set (2 pieces), power cord, USB interface cable, and PC software installation disk.  It is priced at $699.00, quantity one, and is available for immediate delivery.

For the name and location of an authorized distributor near you, contact B&K Precision Corporation,22820 Savi Ranch Parkway, Yorba Linda, California, 92887, Tel: (714) 921-9095, Fax: (714) 921-6422 or visit our Web site at www.bkprecision.com.

For additional information, contact Jorg Hesser at (714) 921-9095, e-mail: jhesser@bkprecision.com or Matthew Stein at (951) 850-1521, e-mail: mstein812@verizon.net (Agency Contact).

Full featured 60 MHz Digital Oscilloscope that won’t break your budget

Full featured 60 MHz Digital Oscilloscope that won’t break your budget

B&K Precision Corporation’s new Model 2534 dual channel Digital Storage Oscilloscope (DSO) delivers an unmatched combination of performance and value. This versatile bench top unit is a high-performance 60 MHz digital oscilloscope with analog-style knobs and controls.  The Auto measurement function makes this oscilloscope easy to use. Advanced triggering, digital filtering, waveform recorder, delayed sweep/zoom, mask testing, automatic measurements, and FFT functions provide the user with many options to debug circuits.

The 2534 comes with PC software that can be used to easily capture, save, and analyze waveforms and measurement results. The low price of $799.00 makes it one of the most aggressively priced scopes on the market today.  It is the ideal oscilloscope for use in education, design, training, field service, maintenance, manufacturing and quality control.

• The Model 2534’s many outstanding features include:
• 60 MHz bandwidth, 400 MSa/s sample rate
• 4000 point record length for each channel
• One touch automatic setup for ease of use (Auto)
• Color LCD display
• USB front panel host port for USB flash drives and USB device interface standard
• Advanced features include digital filter with adjustable limits, mask testing, and waveform recorder/replay mode
• Cursors with readouts
• 24 automatic measurements
• FFT standard plus 3 additional math functions
• Extensive triggering capabilities including pulse width and line-selectable video trigger
• Multiple language interface
• Capture, save and analyze waveform data with the included PC software

Measuring 12.2” wide by 10.6” deep by 5.8” high, the Model 2534 60 MHz Digital Storage Oscilloscope weighs 8 pounds and comes complete with operating manual, 10:1 probe Set (2 pieces), power cord, USB interface cable, and PC software installation disk.  It is priced at $799.00, quantity one, and is available for immediate delivery.

For the name and location of an authorized distributor near you, contact B&K Precision Corporation,22820 Savi Ranch Parkway, Yorba Linda, California, 92887, Tel: (714) 921-9095, Fax: (714) 921-6422 or visit our Web site at www.bkprecision.com.

For additional information, contact Jorg Hesser at (714) 921-9095, e-mail: jhesser@bkprecision.com or Matthew Stein at (951) 850-1521, e-mail: mstein812@verizon.net (Agency Contact).

Attention Editor: To obtain a high resolution image of this product, please go to www.bkprecision.com/hires. The photos are easy to download, just point at the desired image and right click to save to your hard drive or other specified location.

Hand-Held RF Field Strength Meter Has Frequency Range Of 100KHz To 2.0GHz

B&K Precision Corporation’s Model 2640 is a battery operated, hand-held RF Field Strength Meter capable of measuring RF levels and electric field strength. The synthesizer-based design provides reliable measurements across a wide reception range of 100KHz to 2000MHz, a remarkably low noise floor of -110 dBm to detect weak signals, and basic spectrum analyzer functionality. Priced at only $2,250.00, the hand-held RF Field Strength Meter is ideal for users to test, install and maintain Mobile Telecommunications Systems, Cellular and Cordless Phone, CB Paging, Paging Systems, Cable and Satellite TV Systems, as well as antenna site measurements and maintenance.

Interface Software Permits Easy Addition of ICs to IC Tester Libraries

B&K Precision Corporation’s, new AK57X Interface Software with USB Dongle  interfaces the B+K Precision Model 570A Analog and Model 575A Digital Hand Held IC Testers with the CompactLink Functional IC Test Generating Software to permit the easy addition of new ICs to the tester’s libraries. Priced at $625, the software requires an RS-232 or USB (required adaptor included) connection to a PC and runs with Microsoft XP and a USB jack for the Licensing Dongle.

New Family of Programmable, Single Output DC Power Supplies Offers Up to 72V Output

B&K Precision Corporation’s Models 9120A, 9121A, 9122A, 9123A, and 9124, are laboratory grade Single Output Digital DC Power Supplies. The bench top units  provide clean, stable and reliable power and offer a programmable output ranging from 0-32V, 0-3A (Model 9120A) to 0 to 72V, 0 to 1.2A (Model 9124). Pricing begins at a low $709 for the Model 9120A, $715 for the Model 9121A, $739 for the Model 9122A, $799 for the Model 9123A and $715 for the Model 9124. All of the units can be remotely controlled from any PC with USB or RS-232 interface, allowing the user to program and monitor all parameters through easy-to-use SCPI commands. Additionally, the Model 9123A can be controlled via GPIB interface and includes a GPIB to TTL conversion adapter cable.